THUNDER TIGER MTA4 User Manual

Thunder Tiger Corporation guarantees this model kit to be free from defects in both material and workmanship. The
total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty does
not cover any components damaged by use or modification. Part or parts missing from this kit must be reported within
60 days of purchase. No part or parts will be sent under warranty without proof of purchase. To receive part or parts
under warranty, the service center must receive a proof of purchase and/or the defective part or parts. Should you
find a defective or missing part, contact the authorized Thunder Tiger Service/Distributor nearest you. Under no
circumstances can a dealer or distributor accept return of a kit if assembly has started.
JD6224
1/8 4WD NITRO MONSTER TRUCK
No.6218--F

THUNDER TIGER MTA4 Specifications

General

Scale	1/8
Drivetrain	4WD
Fuel Type	Nitro
Type	Monster Truck
Chassis	Aluminum
Length	540mm
Radio System	2.4GHz
Tire Type	Off-Road
Weight	4.5kg

Summary

Instruction Manual and Warranty

Warranty Information

Details the warranty coverage, limitations, and claim procedures for the model kit.

Introduction and Required Items

Product Introduction

Welcomes the user and provides an overview of the Thunder Tiger MTA-4 nitro monster truck.

Items Required for Operation

Lists essential tools, equipment, and helpful items needed to operate the model.

Safety Warnings and Initial Setup

General Warnings

Provides critical safety precautions and operational warnings for the model.

Unwrapping and Tire/Flag Installation

Guides on unpacking the truck and installing the tires and flag.

Radio System Installation and Preparation

Installing the Radio Gear

Step-by-step instructions for installing the receiver, servos, and related components.

Charging the Glow Plug Igniter

Instructions on how to charge the glow plug igniter for engine starting.

Preparing the Radio System

Details on installing the transmitter antenna and checking radio frequencies.

Radio Battery Installation

Guidance on installing batteries into the transmitter and receiver.

Linkage Installation and Adjustments

Installing Steering Servo Linkage

Connects the steering servo to the steering rack for directional control.

Installing Throttle/Brake Linkage

Connects the throttle and brake servos to the respective control mechanisms.

Installing FWD/REV Linkage

Installs the linkage for the forward and reverse transmission system.

Adjusting Throttle/Brake Linkage

Fine-tunes the throttle and brake linkages for optimal performance.

Adjusting Forward/Reverse Linkage

Adjusts the linkage for the forward/reverse transmission for proper gear shifting.

Radio Operation and Control Functions

Radio Operation

Explains the correct procedure for turning the radio transmitter and receiver on/off.

Operating Radio Steering Function

Tests and adjusts the steering controls and front wheel direction.

Operating Radio Throttle/Brake and Reverse Function

Details how to operate the throttle, brake, and forward/reverse controls.

Engine Management and Operation

Adjusting Carburetor

Guides on setting the high-speed, idle, and low-speed carburetor needles.

Fuelling the Vehicle

Instructions for safely filling the fuel tank with glow fuel.

Preparing the Engine

Checks the glow plug and igniter, and primes the carburetor before starting.

Starting the Engine

Details methods for starting the engine using pull start or hex start.

Stopping the Engine

Explains the correct and safe procedure for shutting down the engine.

Engine Break-In Procedure

Outlines the initial break-in process for a new engine.

Engine Setting for Operation

Fine-tunes the carburetor for optimal engine performance after break-in.

Vehicle Setup and Maintenance

Storing Your Car

Provides steps for proper maintenance and storage to keep the truck in good condition.

General Setup Adjustments

Covers adjustments for two-speed, toe-in/out, camber, ride height, and slipper clutch.

Shock Springs

Information on available shock springs and their effect on handling.

Optional Gearing

Discusses alternative gear ratios to customize acceleration and top speed.

Product Features

Key Features Overview

Highlights the main features and specifications of the MTA-4 Monster Truck.