THUNDER TIGER Titan Raptor 50 Size 3D Heli - User Manual

THUNDER TIGER CORP. www.thundertiger.com
A S S E M B L Y & M A I N T E N A N C E
SPECIFICATION:
Full length of fuselage:1200mm(47.24")
Full width of fuselage:140mm(5.51")
Total height:400mm(15.75")
Main rotor dia:1345mm(52.95") 600mm Blades
Main rotor dia:1385mm(54.53") 620mm Blades
Tail rotor dia:237mm(9.33")
Gear ratio:1:8.5:4.56(STD)
Gear ratio:1:8.73:4.56(OP)
Full Equipped weight:3000g (6.6 lbs)
SPECIFICATION:
Full length of fuselage:1220mm(48.03")
Full width of fuselage:140mm(5.51")
Total height:400mm(15.75")
Main rotor dia:1345mm(52.95") 600mm Blades
Main rotor dia:1385mm(54.53") 620mm Blades
Tail rotor dia:237mm(9.33")
Gear ratio:1:8.5:4.56(STD)
Gear ratio:1:8.73:4.56(OP)
Full Equipped weight:3000g (6.6 lbs)
JK0157 V4
C 2008

THUNDER TIGER Titan Raptor 50 Size 3D Heli Specifications

General

Brand	THUNDER TIGER
Model	Titan Raptor 50 Size 3D Heli
Category	Toy
Language	English

Summary

ASSEMBLING SECTION

Fuel Tank Assembly

Clutch Bell Assembly

Main Frame Assembly - Part 1

Main Drive Gear Assembly

Washout Assembly

Main Frame Assembly - Part 2

Main Frame Assembly - Part 3

Engine Assembly

Main Frame Assembly - Part 4

Landing Skid Assembly

Main Rotor Head Assembly

Guides the assembly of the main rotor head and its components.

Flybar Assembly

Explains the assembly of the flybar and mixing levers for stability.

Main Frame Assembly - Part 5

Tail Unit Assembly

Covers the assembly of the tail rotor unit and its control linkages.

Tail Boom Assembly

Details the installation of the tail boom, drive belt, and control rods.

Main Frame Assembly - Part 6

Servo Installation - Part 1

Servo Installation - Part 2

Receiver and Gyro Installation

Body and Canopy Assembly

Main Rotor Assembly

LINKAGE SET-UP SECTION

Setting Main Rotor Blades Pitch Angle

Guides adjustment of main rotor blade pitch for optimal flight.

Pitch Push Pull Lever Adjustment

Collective Travel for F3 C and 3 D Flying

Configures collective pitch range for advanced flying styles.

Configuring Raptor 50 for 3 D Flight

Radio and Control Linkage Setup

Throttle Adjustment and Linkage

Sets up the throttle servo and linkage for precise engine control.

Collective Pitch Setup for Beginners

Configures collective pitch for novice pilots.

Cyclic Control Setup

Adjusts elevator and aileron linkages for cyclic flight control.

Tail Rotor Control and Gyro Setup

Configures tail rotor control and gyro for stable flight.

Blade Modification and Strengthening

After Flight Maintenance and Troubleshooting

Troubleshooting Helicopter Problems