Need help?Do you have a question about the THUNDER TIGER Raptor SE 50 Size 3D Heli and is the answer not in the manual?
General| Size | 50 Size |
|---|---|
| Gyro | Heading hold gyro |
| Recommended Skill Level | Intermediate to Advanced |
| Type | Helicopter |
| Main Rotor Diameter | 1345 mm |
| Tail Rotor Diameter | 260 mm |
| Radio | 6-channel or more |
Instructions for assembling the fuel tank components, including clunk and tubing.
Details on assembling the clutch bell, including bearings and drive gear.
Initial assembly of the main frame, focusing on spacers, bearings, and starter shaft.
Instructions for assembling the main drive gear, including the one-way clutch.
Steps for assembling the washout system, including control levers and linkages.
Continuation of main frame assembly, attaching control arms and linkages.
Further main frame assembly, connecting main shaft, gear assembly, and swashplate.
Overview of setting up the transmitter and mechanical linkages for optimal performance.
Essential checks to perform on the helicopter after each flight session.
Common issues and solutions for engine starting and helicopter flight problems.
To Next Page