Need help?Do you have a question about the THUNDER TIGER RAPTOR and is the answer not in the manual?
General| Brand | Thunder Tiger |
|---|---|
| Model | Raptor |
| Fuel | Nitro |
| Channels | 6 |
| Type | Helicopter |
| Power Source | Nitro Fuel |
| Skill Level | Intermediate |
| Battery | Receiver pack |
General welcome and overview of the Thunder Tiger Raptor 50 V2 helicopter model.
Critical safety precautions, liability, and AMA membership details for helicopter operation.
Essential pre-flight checks to ensure safe helicopter operation and performance.
Procedures for inspecting the helicopter after each flight for damage and wear.
List of additional components and essential tools needed for helicopter assembly.
Detailed steps for assembling the main helicopter frame and its structural components.
Instructions for assembling the main rotor, drive gear, clutch, and related components.
Steps for installing the engine, tail unit, landing skids, and associated parts.
Guide for installing servos, receiver, gyro, and fitting the body and canopy.
Setting up the throttle linkage for proper engine speed control and response.
Adjusting main rotor blade pitch angles and collective travel for optimal flight.
Setting up controls and configurations specifically for 3D flying and radio linkage.
Essential checks to perform on the helicopter after completing a flight.
Common problems and solutions for helicopter engine and flight issues.
To Next Page
