Need help?Do you have a question about the THUNDER TIGER Raptor 90 3D and is the answer not in the manual?
General| Brand | THUNDER TIGER |
|---|---|
| Model | Raptor 90 3D |
| Category | Toy |
| Language | English |
Details the unique construction using aluminum and molded materials for strength.
Explains the geometry for minimized cross-coupling in control commands.
Describes the constant drive tail rotor system for full control during autorotations.
Lists essential radio components, engine requirements, and necessary accessories.
Details specifications for rotor blades and requirements for the engine starting system.
Lists standard hobby tools needed for building the model.
Details the assembly of the upper main frame components using parts from Bag A.
Covers the assembly of the lower main frame components using parts from Bag B.
Details the installation of the pitch frame and associated subassemblies.
Guides the installation of the main shaft and related gear components.
Covers the assembly of the main rotor head using parts from Bag F.
Details the assembly of the flybar seesaw mechanism.
Outlines the overall process for assembling the tail section using parts from Bag G.
Details the assembly of the tail transmission components.
Guides the assembly of the tail rotor and its control system.
Instructs on mounting the completed rotor head onto the main shaft.
Details the process of installing the engine into the helicopter frame.
Guides the assembly and installation of the landing gear system.
Details the initial installation of servos and their pushrods.
Instructions for mounting the receiver, gyro, and receiver battery.
Guides the cutting, fitting, and installation of the helicopter body and canopy.
Explains how to adjust the gear mesh for smooth operation and minimum backlash.
Describes how to set the initial collective pitch using the frame scales.
Lists important operational guidelines and precautions for safe use.
Provides guidance on post-flight maintenance and proper storage procedures.
Lists checks to perform after each flight to ensure model integrity.
Addresses common problems preventing the engine from starting or running.
Covers troubleshooting for common helicopter operation problems like shaking or lift-off.
Outlines critical components to inspect immediately following a crash.
To Next Page