ThyssenKrupp Flow2 User Manual

Controls
Flow2 stairlift
24
2.2.6 Using the call and park stations
1. Check that the stairs are free of any objects that could cause an
obstruction.
2. Place the joystick in the hole in the call and park box (fig. 2/25).
3. Push the joystick in the direction of the stairlift symbol to bring the lift
to you (fig. 2/26 A).
4. Fold up the seat and press the joystick at the side with the ‘P’ to send
the stairlift to the nearest parking position (fig. 2/26 B).
a.
b
a.
b
Fig. 2/26: Symbols on the call and
park box.
a. Calling the stairlift.
b. Parking the stairlift.
Fig. 2/26: Symbols on the call and
park box.
a. Calling the stairlift.
b. Parking the stairlift.
Fig. 2/25: Insert the joystick in the
call and park box.
Fig. 2/25: Insert the joystick in the
call and park box.
NOTE
As soon as you release the joystick, the stairlift will stop
immediately.
NOTE
As soon as you release the joystick, the stairlift will stop
immediately.
WARNING
Ensure that you do not obstruct anyone. Therefore, always
call or park the stairlift with the seat folded.
WARNING
Ensure that you do not obstruct anyone. Therefore, always
call or park the stairlift with the seat folded.

ThyssenKrupp Flow2 Specifications

General

Brand	ThyssenKrupp
Model	Flow2
Category	Stairlifts
Language	English