ThyssenKrupp Flow2 User Manual

Flow2 stairlift
27
4. Maintenance
4.1 Cleaning
Clean the stairlift regularly with a clean, slightly moist cloth and
possibly a light cleaning agent.
You can remove the dust particles that collect under the rail during the
running-in period of your stairlift with a vacuum cleaner.
4.2 Replacing the batteries
When the 'C' cell batteries in a control are about to become empty, the lamp
- with joystick operation - on the control concerned will flash green. In that
case, replace the batteries.
1. Remove the cover by lifting it, or by placing the joystick in the cutout
under the cover and then turning it a half turn (see fig. 4/1).
2. Remove the batteries from the control unit (see fig. 4/2).
-
-
CAUTION
Do not use any caustic or abrasive cleaning agents, and do
not use too much water.
CAUTION
Do not use any caustic or abrasive cleaning agents, and do
not use too much water.
Fig. 4/1: Removing the cover.Fig. 4/1: Removing the cover. Fig. 4/2: Control unit batteries.Fig. 4/2: Control unit batteries.

ThyssenKrupp Flow2 Specifications

General

Brand	ThyssenKrupp
Model	Flow2
Category	Stairlifts
Language	English