ThyssenKrupp HomeGlide - Warning Signals; Warning and Alarm Signals

18
HomeGlide stairlift
3. Warning signals
Failuresmayoccur.Ifthestairliftdoesnotwork(properly),andyoucan
notsolvetheproblemwiththisusermanual,thencallinthehelpofyour
supplier. (see chapter 4.5).
3.1 Warning and alarm signals
Signal Meaning Solution
Fast beeps that
repeateveryten
seconds.
The stairlift is not on
a charging contact,
orthepowersupply
is disconnected.
Drive the stairlift to a charging
contact.
Connectthepowersupply.
Fast beeps that
continuously
repeats.
- The stairlift
or automatic
hinge rail has
encountered an
obstruction and
stopped.
- The seat is
not positioned
correctly
- There is a
malfunction in the
stairlift.
- Driveawayfromthe
obstacle and remove it.
- Turn the seat in its driving
position.
- Contactyoursupplier.
CAUTION
Nevertrytorepairthestairliftyourself.