A：auto flip
Enable auto flip function.
B：auto stop time
Automatic stop time indicates that how long the speed dome does not receive stop code
to stop the PTZ action selectable 5 sec, 15 sec, 30 sec, 60 sec.
C：menu off time
In the case of open the menu, how long it will automatically turn off the menu display
without any actions. Move the cursor to the menu off time, open the “aperture on” to enter
the setup mode, the joystick up and down to select a menu off time 1/2/5/10 minutes"
D：tilt angle set
Select “0” degree through “-11” degree, minus degree is available.
Set interval is 1 degree. When the user finishes to set starting angle, the configuration of
angle will be saved on condition of power off or resuming of factory settings.
E：speed level
There are four options for selection including auto, high speed, medium speed and low
speed. You can change the max speed by reconfiguration.
F：idle action
Move your pointer to “idle action” then press “aperture on” to enter submenu.
To Next Page
