Tiandy IP Speed Dome Camera - IR LED Settings

DOME SETTINGS
-------------------------------------------
Auto Flip ：ON
Auto Stop Time ：30Sec
Menu OFF Time ：5Min
Tilt Angle Set ：-5
Speed Level ：Auto
<Idle Action>
<IR Led Setting>
<Next Page>
Back
Exit
IDLE ACTION
-------------------------------------------
Time ：30Sec
Action ：None
Back
Exit
A1
B1
A1：idle time
Selectable 30 sec/1min/5min/10min/30min，press “aperture on” to confirm.
B1：idle action
Use joystick to Select idle action, including preset 1/ scan1/ cruiser 1/ pattern1 /none
G：IR LED settings
IR LED SETTINGS
----------------------------------------------------
Control Mode ：Auto
Threshold ：Standard
Delay Time ：Middle
Start Time ：19:00
Stop Time ：06:00
Zoom Match ：ON
<Bright Set>
BACK
Exit
DOME SETTINGS
-------------------------------------------
Auto Flip ：ON
Auto Stop Time ：30Sec
Menu OFF Time ：5Min
Tilt Angle Set ：-5
Speed Level ：Auto
<Idle Action>
<IR Led Setting>
<Next Page>
Back
Exit
A1
B1
C1
D1
E1
F1
G1
A1：control mode
Use joystick to select control mode including auto, auto, followed by camera, timer start,
manually turn on and manually shut off.
Description of five mode
1: Auto: IR is turned on or shut off completely by the light sensors control, and the speed
dome force the camera to switch black and white. When the photosensitive sensor
detects brightness around less than the photosensitive threshold, the infrared light will
open and the camera will be forced from color to black and white. When the
photosensitive sensor detects brightness around more than the photosensitive threshold,
the infrared light will shut off and the camera will forced from black and white to color.
2：followed by camera: infrared light is triggered automatically by the camera color switch.