Tiandy IP Speed Dome Camera - Camera Settings Details

set to: air/mist/heating on/off/Auto, established in accordance with the aperture opening,
set an end.
B1: azimuth zero point setting
Move the cursor to "set the zero point position," according to the aperture opening for
"azimuth setting the zero point" setting, move shake bar, select a position zero,
established in accordance with the aperture opening, set an end.
C1: azimuth North set
Move the cursor to "azimuth North setting" according to the aperture opening for
"orientation means North setting" settings, move shake bar, select a location for the North,
established in accordance with the aperture opening, set an end.
Camera settings
2 million camera settings:
A
B
E
C
D
F
G
H
MAIN MENU
-------------------------------------------
Language：English
<System Information>
<Display Settings>
<Dome Settings>
<Camera Settings>
<Motion>
<Help>
Exit
CAMERA SETTINGS
-------------------------------------------
Focus Mode ：Auto
Digital Zoom ：OFF
Backlight ：OFF
Image Freeze ：OFF
Zoom Speed ：Middle
Day Night ：Auto
Camera Reset ：OFF
<Advanced>
Back
Exit
A. focus mode
Move the cursor to "focus mode", press IRIS open to enter focus mode setting, rocker
bottom for automatic and manual zoom and focus mode selection.
B.Digital Zoom
Move the cursor to "digital zoom", press the IRIS on entering the digital zoom setting,
rocker bottom on and off settings.
C.Backlight compensation
Switch settings. When the image brightness of the screen low, open the brightness of the
backlight compensation to improve webcam.
D.Image freeze
Switch settings. When you want to lock the current picture, open the image to freeze will
always show the current image, until you close the image freezes again.