Tiandy IP Speed Dome Camera - Page 62

E.Variable-speed
Move the cursor to "zoom speed", press the aperture opening into the zoom speed
setting mode, rocker arm up and down to select the camera's zoom speed, can be set to
"low", "medium", "high speed".
F.Day and night conversion
Move the cursor to "transform day and night", press the aperture on enter conversion
settings around the clock mode, rocker arm up and down to select camera night mode
can be set to "auto", "color", "black and white".
G． Restore factory
Select camera to factory settings to "on", the system will restore the parameters to the
factory settings of the camera
H． Senior
A1
B1
C1
D1
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Color Settings>
<Special Settings>
Back
Exit
CAMERA SETTINGS
-------------------------------------------
Focus Mode ：Auto
Digital Zoom ：OFF
Backlight ：OFF
Image Freeze ：OFF
Zoom Speed ：Middle
Day Night ：Auto
Camera Reset ：OFF
<Advanced>
Back
Exit
A1. white balance mode
Move the cursor to "white balance mode", press the aperture opening into white balance
setting mode, rocker bottom can be set separately for "/ATW/automatic/manual
auto/indoor/outdoor/outdoor sodium Na Kouang auto/light/key/key mode is triggered".
When the white balance mode to manual when the r, b gain value can be adjusted: move
the cursor to "r gain" by IRIS on entering r-gain setting mode, rocker set r-gain
value.Move the cursor to "b gain" by IRIS on entering the b gain settings mode, rocker
sets b gain value。