Tiandy IP Speed Dome Camera - Advanced Camera Settings

A1
B1
C1
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Color Settings>
<Special Settings>
Back
Exit
WB SETTINGS
-------------------------------------------
WB Mode ：Auto
Red Gain ：210
Blue Gain ：210
Back
Exit
B1.Exposure mode
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Color Settings>
<Special Settings>
Back
Exit
EXPOSURE SETTINGS
-------------------------------------------
Exposure Mode ：Auto
Shutter Priority ：Auto
Iris Priority ：Auto
Bright Priority ：Auto
Camera Gain ：-3dB
CAM_ExpComp ：OFF
ExpComp Gain ：-7
Back
Exit
Move the cursor to "exposure mode", press the stop on entering the exposure mode set,
rocker bottom can be set to "auto/priority/aperture priority/shutter priority/manual
brightness"
When the shutter priority exposure mode State, move the cursor to "shutter priority" by
IRIS on entering setup mode, rocker set the shutter speed value.
When aperture priority exposure mode State, move the cursor to "Aperture priority" by
IRIS on entering setup mode, joystick up or down to set the aperture value.
Brightness priority status when the exposure mode, move the cursor to "brightness
priority" by IRIS on entering setup mode, rocker set the brightness values.
C1. color
settings