Tiandy IP Speed Dome Camera - Special Settings and Image Adjustments

A2
B2
C2
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Color Settings>
<Special Settings>
Back
Exit
COLOR SETTINGS
-------------------------------------------
Color Gain ：60%
Hue Setting ：-14
Chroma Suppress ：OFF
Gamma Setting ：Standard
Back
Exit
D2
A2. color-gain
Move the cursor to "color-gain", according to the aperture opening into the color-gain
settings, and rocker color-gain is set to 60%~200%.
B2. Hue settings
Move the cursor to "tone settings", press the stop on entering-tone set, joystick up or
down to set the tone for the -14~14 (even).
C2. Chroma Suppress
Move the cursor to the "Suppression of color", set the aperture opening into the color
suppression, joystick up or down to set the tone for the level I, level II, and level III, closed.
D2. Gamma settings
Move the cursor to "Gamma settings", press the stop on entering the Gamma setting,
rocker set the Gamma to level I, level II, III, IV, v-class, standard.
D1.Special setting
F2
A2
B2
C2
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Color Settings>
<Special Settings>
Back
Exit
SPECIAL SETTINGS
-------------------------------------------
Wide Dynamic ：OFF
High Sensitivity ：OFF
Slow Exposure ：OFF
Image Denoise ：OFF
Mirror Image ：OFF
Aperture Setting ： 00
Ir Correct ： OFF
Back
Exit
D2
E2
G2
A2. move the cursor to the "dynamic", set the aperture opening into a wide dynamic,
rocker arm up and down to select parameters, can be set to "off/on/auto"
B2. Move the cursor to "high sensitivity", press the stop on entering the high sensitivity
setting, rocker arm up and down to select parameters, can be set to "off/on".