Tiandy IP Speed Dome Camera - Motion Configuration Menu

A2
B2
C2
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Special Settings>
Back
Exit
SPECIAL SETTINGS
-------------------------------------------
Wide Dynamic ：OFF
Sharpness ：Auto
Aperture_H ：15
Aperture_V ：15
Focus Limit ： 30cm
Back
Exit
D2
E2
A2. move the cursor to the "wide dynamic", set the aperture opening into a wide dynamic,
rocker arm up and down to select parameters, can be set to "off/open".
B2. move the cursor to "sharpness", press the IRIS on entering the sharpness setting,
rocker arm up and down to select parameters, can be set to "off/on".
C2. when manual is sharpening, move the cursor to "horizontal", set the aperture opening
into the horizontal resolution, rocker arm up and down to select the parameter can be set
to 00~64.
D2. When manually is sharpening, move the cursor to "vertical resolution", set the
aperture opening into the vertical resolution, rocker arm up and down to select the
parameter can be set to 00—64
E2. Move the cursor to "minimum focus distance", set the aperture opening into the
minimum focusing distance, rocker arm up and down to select parameters, can be set to
"1cm/10cm/30cm/1M/1.5M"。
Motion
MAIN MENU
-------------------------------------------
Language：English
<System Information>
<Display Settings>
<Dome Settings>
<Camera Settings>
<Motion>
<Help>
Exit
A
B
E
C
D
F
MOTION
-------------------------------------------
<Preset>
<Scan>
<Cruise>
<Pattern>
<Zones>
<Timing Action>
Back
Exit
A:Preset positions