Tiandy IP Speed Dome Camera - Page 75

C：Cruise
MOTION
-------------------------------------------
<Preset>
<Scan>
<Cruise>
<Pattern>
<Zones>
<Timing Action>
Back
Exit
CRUISE
-------------------------------------------
Cruise Number ：1
Title Set ：Cruise1
Start
<Cruise Set>
Delete
Back
Exit
A1
B1
C1
D1
E1
A1., cruise group
Move the cursor to "sweep the cruise group," press the IRIS on entering setup mode,
cruise group, rocker, cruising up and down group
Settings. Supports 8 ball leads a group cruise route.
B1. Title settings
Move the cursor to the "headings" title by the aperture opening into the cruise path
settings submenu, cruising path header settings. Note: the current title set is on the WEB.
C1. Start cruising
Move the cursor to "start the cruise", press IRIS open to initiate a cruises group cruise
path.
D1. Cruise Set
Move the cursor to "Edit series", press the stop on entering the cruise series Edit
submenu.
E1. Delete
Move the cursor to "delete", press the aperture on delete cruises group cruise path.
D1:Cruise Set