A1. Scan Number
Move the cursor to "scan group number" setting mode press the IRIS on entering the
scan group number, rocker arm to scan up and down group Settings. Supports 8 ball
leads the Group scan path.
B1. Title set
Move the cursor to the "headings" title by the aperture opening into the scan path settings
submenu, path header settings for scanning. Note: the current title set is on the WEB.
C1. Start
Move the cursor to "Start scan", press IRIS open to initiate a scan path, scan group.
D1. Left Limit
Move the cursor to "set the left edge" and click stop on-access scan set left border mode,
appears on the screen "press IRIS open to confirm ...".Users can operate on the dome,
reaches the desired position and press the aperture opened to store the current path to
the location to scan to the left edge.
E1. Right Limit
Move the cursor to "set right" right edge press the stop on-access scan settings mode,
appears on the screen "press IRIS open to confirm ...".Users can operate on the dome,
reaches the desired position and press the aperture opened to store the current path to
the location to scan the right border.
F1. Scan speed
Move the cursor to "scanning speed", press stop on-access scan speed setting mode,
rocker arm upper and lower speed level set, speed 1-30 adjustable
To Next Page
Loading...
