F1: week settings
By IRIS on entering setup mode, rocker arm up and down to select: "Monday" ~ "Sunday".
G1: timed run set up replication function
7 days a week, can be set separately, or you can just set "Monday", other dates through
this feature to copy them one by one, so as to achieve flexible and efficient input methods.
H1: move the cursor to this, Aperture opening you up one level.
Notes:
Time overlap settings do not allow the various periods of time, and does not allow time
period spans 00:00.Run when you run the function by the guards, if the scheduled time is
up, you interrupt the currently running and scheduled runs function.During a scheduled
run time period, user action machine, will interrupt a timed run feature, such as no action
within a specified time, and timing function at the current time period, scheduled runs
function again.
Help
MAIN MENU
-------------------------------------------
Language：English
<System Information>
<Display Settings>
<Dome Settings>
<Camera Settings>
<Motion>
<Help>
Exit
MENU ORERATION HELP
-------------------------------------------
1.Call preset 95 to open menu
2.Move joystick to select item
3.Iris open to enter edit mode
4.Move joystick to edit parameter
5.Focus to control L/R direction
6.Iris open to confirm
7.Iris close to cancel
Back Exit
To Next Page
Loading...
