• Bluetooth Mode
1. With your Bluetooth device and the TIBO Plus
speakers system both turned ON, press the
Mode button on the Plus speakers or the remote
control to make the Plus speakers system enter
Bluetooth mode. The speakers will reply saying
“Bluetooth mode”.
2. The blue light will flash on the Plus speakers to
show that Bluetooth mode is active and the
speakers are discoverable.
3. Set your Bluetooth device to discoverable so it
can discover (refer to your Bluetooth device
guide for details) TIBO Plus speakers system.
Locate the Bluetooth device list in the user
interface of your device.
4. From the Bluetooth device list, select the device
named “TIBO Plus 2.1 or Plus 3.1” (depending
on which model you have).
5. If your Bluetooth device prompts you for an
access code, enter digits 0000 (four zeros) and
press OK. Some devices also ask you to accept
the connection. Your Bluetooth device indicates
when pairing is complete.
6. The Plus speaker system indicates pairing is
complete with welcome jingle.
To Next Page
Loading...
