Tibo Plus 2 - TECHNICAL SPECIFICATION; Plus 2 Speaker Specifications; Plus 3 Speaker Specifications

13
Turn it back on
TECHNICAL SPECIFICATION
Plus 2 Specication
Power output 2 x 35 Watts RMS
Tweeter 1” silk dome
Woofer 4” paper cone
Nominal Impedance 4 Ohm
Sensitivity 2.83v (1W/1m) 85 dB
Input sensitivity 550 mV
Total Harmonic Distortion < 0.3%
Frequency Response 60 – 20,000 Hz
Amplier Class D digital
Wireless technology Bluetooth 4.0, supports aptX codec
Inputs 2 x Optical, 1 x RCA, 1 x 3.5 mm jack,
Outputs 1 x Subwoofer
USB Port for charging only 5 V 1A
Input Voltage, Frequency AC 100 V - 240 V 50/60 Hz (auto switching)
Standby Power Consumption < 0.5 W
Dimensions (WxHxD) 132 x 210 x 197 mm (each speaker)
Weight (Active) 3.1 kg
Weight (Passive) 2.4 kg
Plus 3 Specication
Power output 2 x 55 Watts RMS
Tweeter 1” silk dome
Woofer 5.25” paper cone
Nominal Impedance 4 Ohm
Sensitivity 2.83v (1W/1m) 88 dB
Input sensitivity 550 mV
Total Harmonic Distortion < 0.3%
Frequency Response 50 – 20,000 Hz
Amplier Class D digital
Wireless Technology Bluetooth 4.0, supports aptX codec
Inputs 2 x Optical, 1 x RCA, 1 x 3.5 mm jack,
Outputs 1 x Subwoofer
USB Port (for charging only) 5 V 1A
Input Voltage, Frequency AC 100 V - 240 V 50/60 Hz (auto switching)
Standby Power Consumption < 0.5 W
Dimensions (WxHxD) 168 x 268 x 235 mm (each speaker)
Weight (Active) 4.2 kg
Weight (Passive) 3.6 kg