TIE DOWN 70910 - User Manual

404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
sales@tiedown.com
Do not throw away these instructions!
Read and understand these instructions before
using this device. For any questions, please call
(404) 344-0000.
Instruction #08377
E1834; Rev. 3/29/21
Adjustable Swing Gate
Installation and Use
Part #70910
WARNING: This product can expose you to chemicals including Nickel, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Swing Gate Hinge Assembly
Wheeled Gate End Section
Center Adjustable
Swing Gate Section
Hinge Gate End Section
The Adjustable Swing Gate can be
set up to fit 70” to 85” gate widths.

Summary

Installation Steps

Step 1: Positioning and Initial Fastener Removal

Position the gate in the opening and remove the outer u-bolt, washers, and nylock nuts.

Step 3: Extending Wheeled Gate Section

Extend the wheeled section to meet the other guardrail; gate width is adjustable from 70" to 85".

Step 4: Securing Center Section and Hinge

Slide center section through end sections, ensuring smooth operation, and secure with screws and nylock nuts.

Step 5: Securing the Swing Gate Latch

Lower the gate latch, wrap the safety chain around posts, and insert into the key hole slot.

Important Safety and Usage Notes

Guardrail Outriggers Requirement

Guardrail outriggers must be used at both ends of any interruption or continuous guardrail section.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Adjustable Swing Gate, Part #70910, is a safety device designed to create a secure barrier in guardrail openings. Its primary function is to provide a movable access point within a continuous guardrail system, enhancing safety by controlling entry and exit to designated areas.

Function Description:

The Adjustable Swing Gate serves as a movable barrier that can be opened and closed to allow passage through a guardrail system. It is designed to integrate seamlessly with existing guardrails, providing a robust and adjustable solution for various opening widths. The gate's adjustability ensures a snug fit, minimizing gaps and potential hazards. When closed, the gate can be secured with a latch and safety chain, preventing unauthorized access or accidental opening. The wheeled end section facilitates smooth operation, allowing the gate to be easily opened and closed by a single user. The hinge mechanism is designed for durability and secure attachment to the guardrail post.

Important Technical Specifications:

• Part Number: #70910
• Adjustable Width Range: The gate can be set up to fit gate widths ranging from 70 inches to 85 inches. This wide adjustability makes it versatile for various guardrail opening sizes.
• Components: The system comprises several key components:
  • Hinge Gate End Section: This section attaches to one guardrail post and contains the hinge mechanism, allowing the gate to swing open and closed.
  • Wheeled Gate End Section: This section features wheels at its base, enabling smooth movement of the gate during opening and closing. It also includes the latching mechanism.
  • Center Adjustable Swing Gate Section: This is the main body of the gate, which slides within the end sections to achieve the desired width.
• Material: While not explicitly stated, the visual representation suggests a robust metal construction, likely steel, for durability and compliance with safety standards.
• Attachment Method: The gate attaches to guardrail posts using U-bolts, washers, and nylock nuts for the hinge section, and a latching mechanism for the wheeled end section. The adjustable center section is secured with self-tapping screws.
• Safety Features: Includes a swing gate latch and a safety chain to secure the gate in the closed position, preventing accidental opening.

Usage Features:

• Ease of Installation: The installation process is straightforward, involving positioning the gate, attaching the hinge section, extending the wheeled section, securing the adjustable center, and finally, tightening all fasteners.
• Adjustability: The gate's ability to adjust from 70" to 85" allows for customization to fit different guardrail openings without requiring multiple gate sizes.
• Smooth Operation: The wheeled gate end section ensures that the gate opens and closes smoothly, reducing effort and potential for jamming.
• Secure Latching: The swing gate latch and safety chain provide a secure closure, essential for maintaining safety in hazardous environments. The safety chain wraps around both guardrail posts and inserts into a keyhole slot, adding an extra layer of security.
• Integration with Guardrails: Designed to fit flush against guardrails, minimizing gaps and creating a continuous safety barrier when closed.
• Clear Instructions: The manual provides step-by-step instructions with accompanying illustrations, making installation and use clear and manageable.
• Warning Information: Includes a California Proposition 65 warning regarding Nickel, indicating a commitment to user awareness and safety compliance.

Maintenance Features:

• Regular Inspection: Although not explicitly detailed as "maintenance features," the design implies that regular inspection of the U-bolts, nylock nuts, self-tapping screws, hinge mechanism, wheels, latch, and safety chain is crucial to ensure continued safe operation.
• Tightening Fasteners: The installation instructions emphasize tightening nylock nuts and securing self-tapping screws, suggesting that periodic checks for tightness might be necessary to prevent loosening due to vibration or repeated use.
• Smooth Operation Check: Users should periodically check that the gate opens and closes smoothly, and that the latch engages correctly. Any stiffness or difficulty in operation may indicate a need for cleaning, lubrication, or adjustment.
• Guardrail Outrigger Requirement: The manual explicitly states that "Guardrail Outriggers MUST be used at both ends of any interruption in continuous guardrail sections, or at both ends of a continuous guardrail section." This is a critical maintenance and installation guideline to ensure the overall stability and integrity of the guardrail system in conjunction with the swing gate. This implies that the structural support of the guardrail system itself is paramount for the safe operation of the swing gate.

The Adjustable Swing Gate is a robust and adaptable safety solution, manufactured in the USA, designed for industrial and commercial applications where controlled access through guardrail systems is required. Its focus on adjustability, secure latching, and ease of installation makes it a practical choice for enhancing workplace safety.

TIE DOWN 70910 Specifications

General

Brand	TIE DOWN
Model	70910
Category	Safety Equipment
Language	English