Check before riding
1. The saddle must be adjusted in the correct position and the bolts must be locked.
2. The indicator is correct, the lamp and horn work normal.
3. The brake lever must be flexible and reliable, and the motor can be powered off
when braking.
4. The accelerator works flexibly and the reset function is normal.
5. The tires of the front and rear wheels have sufficient air volume without serious
wear and tear.
6. Flexible steering function without hindrance.
7. The front and rear wheel nuts are tight not loose.
8. Check whether the battery is fully charged before riding or whether the remaining
battery is enough to ride.
9. Whether the folding switch of the scooter rod is fastened.
How to use the charger correctly
1. When charging with the charger, the charging port of the scooter should be
connected first. (Please align the the output port of the charger with the scooter's
charging port).
2. The charging place should be far away from children, and ensure that the charging
environment is ventilated, dry, and away from flammable and explosive materials.
3. Please be sure to use the company's special charger for charging, otherwise it will
affect the life of the battery or damage the battery.
4. The maximum continuous charging time shall not exceed 18 hours.
5. It is forbidden to connect the charger to the power supply without load.
6. After the charging is completed, you should first pull out the power plug before
pull out the plug of the scooter .
7. After the power is turned on, the red light indicates that the charging is in progress.
When the charger indicator turns to green, the charging is completed.
To Next Page
Loading...
