pressure(45 to 50 psi) for the tire. When the shortage of air is shortened, the
possibility of puncture increases, so check always.
*It is necessary to judge the replacement time by observing the appearance of the tire
such as tire damage,uneven wear.
Step4:Tightening check such as folding part and handle part
Make sure that the bolts and nuts of all parts of the product are tight and free from
loosening. Check the fastening condition and clearance of the folding and fixing parts
of the handle .
Danger !
In this case,stop driving immediately.
If you encounter any of the following situations while driving, stop driving immediately and
contact your nearest branch or service center for proper measures. If you provide pictures and
videos to get accurate diagnosis, professional counseling is available.
*Unusual heating of the motor
*Brake braking status error
*Error messages on the instrument cluster
*When the throttle is returned to its original position
*Abnormal noise if generated
*Product smoke,ignition ,sour odor
*When rain or wet with water or in a small situation
*When other driving is judged to be unreasonable.
10. Maintenance
1)Maintenance and self-maintenance
Electric products can be damaged by various factors. The life span of each part varies
depending on driving habits and driving environment. Parts that exceed the service Life may
cause accidents. Let's manage various parts and prevent safety accidents in advance.
Step1:Check the replacement timing of consumable parts
①
The components and suspension, tires, tubes, wheels, bearings, headset bearings,
discs,brake pads, cables and folding parts, various brackets and other consumable parts
require periodic inspection and always check.
Step2:External damage inspection by driving environment.
①
Replace parts that may be damaged by external driving environment, such as deformation of
To Next Page
Loading...
General