speed dropped, the brakes are finally applied to stop the scooter.
Tip ：Check for safe braking
*For safe braking,check whether the brake lever and drum brake connection are damaged
before and after driving (wire damage,external breakage,etc). And check brake wear and
looseness of brake inner core(inner wire). In the case of hydraulic brakes it is also necessary to
check the oil leakage or deficiency and always check that the braking force is sufficient.
*Due to various factors such as road surface condition and speed, the brake can’t stop the
scooter as expected. The electric ABS function is an auxiliary function to further increase the
braking force. The user should understand the electric ABS and consider the braking time when
riding.
05. Display introduction
1）Turn on/off the scooter: Long press power button(around 3 seconds).
2）Light on/off: Long press mode button(around 3 seconds).
3）Switch speed gear: Short press mode button to change speed gear(1,2,3).
4）Mode function: Short press the power button to change the mode:
TIME>TRIP>ODO>VOL.
TIME:ride time for a single ride
TRIP:mileage for a single ride
ODO:scooter’s total mileage
VOL:battery voltage
To Next Page
Loading...