Tigo TS4-A-O Installation & Quick Start Guide

Tigo Rapid Shutdown
DO NOTDISCONNECT
UNDER LOAD
DANGER
NEC690.12-2017and C22.1-2015Rule 64.218
For installation with frameless modules,
remove metal clips and bolt TS4-A to rail.
Removable clips
Mounting holes (M8)
Note: When installing TS4-A or TS4-A-Duo, connect the input cables to the PV module
before connecting the TS4-A output cables in series.
If disconnecting TS4-A or TS4-A-Duo, disconnect the TS4-A output cables from the string
before disconnecting the input cables from the PV module.
✉
�
☎
TS4-A-O Installation Quick Start Guide
support.tigoenergy.com
support@tigoenergy.com
International: 00800.2255.8446
Americas: +1.408.402.0802
Manual
Tigo Rapid Shutdown
DO NOTDISCONNECT
UNDER LOAD
NEC 690.12-2017and C22.1-2015 Rule 64.218
4 - 123A
TS4-A-O
Tigo RapidShutdown
DONOT DISCONNECT
UNDERLOAD
NEC690.12-2017andC22.1-2015Rule 64.218
4 - 123A
TS4-A-O
Tigo RapidShutdown
DONOT DISCONNECT
UNDERLOAD
NEC690.12-2017andC22.1-2015Rule 64.218
4 - 123A
TS4-A-O
Tigo Rapid Shutdown
DO NOTDISCONNECT
UNDER LOAD
NEC 690.12-2017and C22.1-2015 Rule 64.218
4 - 123A
TS4-A-O
1
3
2

Tigo TS4-A-O Specifications

General

Maximum Input Voltage	60 V
Maximum Output Current	15 A
Operating Temperature Range	-40°C to +85°C
Maximum Input Current	15 A
Maximum Output Voltage	80 V
IP Rating	IP68
Efficiency	99.5%
Function	Optimization
Protection Features	Over-temperature, over-voltage
Type	MLPE (Module Level Power Electronics)