Tiiwee PIR User Manual

ENGLISH
Tiiwee PIR Motion Sensor (For indoor use only)
For Tiiwee Home Alarm System
Introduction
Congratulations with your Tiiwee passive infrared detector. It is intended to be used in combination with
the components of the Tiiwee Home Alarm System and can be wirelessly connected to either the Tiiwee
A2 PIR Siren Alarm or the Tiiwee A1 Alarm Unit (available separately).
This sensor applies digital dual-core fuzzy logic control processing technology and intelligent analysis
algorithms to prevent false alarms. It also features various settings to adjust the PIR sensor to your
personal situation.
Important: This sensor has been programmed to respect a 5 second delay between 2 signals. This is
intentional to save battery power.
Box contents
1 x Tiiwee PIR sensor for Tiiwee Home Alarm System
2 x batteries, 1.5V AAA-type, alkaline
1 x ball-joint mount
2 x screws
1 x double sided mounting tape
1 x instructions for use
Product Overview and activation
To insert the batteries slide off the back panel downwards. Insert the batteries respecting the correct
polarity. Now, slide the back panel in place again. Slide the ball joint in place until it locks in place and
attach the wall mount on the ball joint. Your PIR sensor is now ready to be installed on the mount.
General installation guidelines
Avoid positions that are close to a window, air conditioners, fluorescent lights, heaters, refrigerators,
stoves, and direct sunlight and other places where temperature would change rapidly and air flow is
high. If there are two detectors in the same detecting range, please adjust the position to avoid

Tiiwee PIR Specifications

General

Brand	Tiiwee
Model	PIR
Category	Security Sensors
Language	English

Summary

Tiiwee PIR Motion Sensor

Compatibility with Tiiwee Home Alarm System

Specifies that the PIR sensor is designed for use with the Tiiwee Home Alarm System.

Introduction to Tiiwee PIR Motion Sensor

Battery Saving Delay Feature

Sensor programmed with a 5-second delay between signals to conserve battery power.

Box Contents

Product Overview and Activation

General Installation Guidelines

Optimal Detection Angle and Sensitivity

Detector sensitive to vertical movement; aim at 90-degree angle to walking direction for best results.

Testing the PIR Sensor

Indicator Light Behavior

Signal Detection Indicator

LED flashes once to confirm signal detection and transmission to alarm units.

Low Battery Indicator

LED flashes every 3 seconds indicating low battery; replace batteries promptly.

Connecting to Alarm Siren

Advanced Features

Anti-Tamper Functionality

Anti-tamper switch triggers alarm if back panel is removed, preventing deactivation.

On/Off Switch Operation

Provides an On/Off switch to permanently inactivate the PIR sensor.

LED Indicator Power Saving

Option to switch off the LED indicator to save battery power, but low battery alerts are also disabled.

Adjustable Detection Delay

Set a 5-minute or 5-second delay between detections to save power or ensure responsiveness.

Mode Setting

Default Settings Explanation

Factory settings are '5s' delay and 'Led On' for common usage scenarios.

LED Flash and 5-Second Delay

LED flashes on detection with a 5-second waiting time between signals.

5-Minute Delay for Power Saving

Setting the top switch to Off enables a 5-minute delay for power saving.

LED Flash Control

Lower switch set to Off disables LED flashes for battery saving.

Both Switches Off Configuration

Both switches Off result in a 5-minute interval between signals and no LED flash.

Detection Range Characteristics

Technical Features

Power Options

Powered by AAA batteries or 5V DC via micro-USB port; remove batteries if using adapter.

Technical Specifications

Details standby current, working current, detecting range, wireless distance, frequency, material, and size.