Note:
Make sure to put the Back-Flow Prevention
Rubber inside the Dust Cup,
Otherwise Debris could be easily fallen out
from Dust Cup and also when Vacuum
Cleaner vacuuming, Debris couldn't enter
Dust Cup.
7.4 Clean Motorized Cleaner Head
1. PressllCleaner Head Release Button"to remove Cleaner Head
0
2, Push the Release Switch on the bottom
of CleanerHeadto "6" and Press
Buckle of Brush Roll would bounce up.
3, Take out Brush Roll from Cleaner Head,
support.us2@tikom.cc
To Next Page
Loading...