EasyManua.ls Logo

TILLOTSON TPP-212E User Manual

TILLOTSON TPP-212E
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner’s Manual
MODELS: TPP-212E TPP-212EE
TPP-196R
For Warranty Matters, Call Toll free: 1-866-591-8921
For tuning service, contact your local dealer or sales@tillotson.ie
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE
ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE
INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein.

Questions and Answers:

TILLOTSON TPP-212E Specifications

General IconGeneral
Displacement212 cc
Fuel TypeGasoline
Bore x Stroke70 mm x 55 mm
Cooling SystemAir-cooled
Starting SystemRecoil start
Shaft OrientationHorizontal
Oil Capacity0.6 liters
Ignition SystemTransistorized magneto ignition
Shaft Size3/4 inch diameter
Fuel Tank Capacity3.6 liters

Summary

Safety Information and Symbols

Safety Symbols and Signal Words

Explains safety alert symbols, signal words (DANGER, WARNING, CAUTION), and hazard symbols.

Features and Controls

Critical Safety Warnings

Engine Operation

Starting the Engine

Step-by-step guide for starting the engine, including pre-start checks.

Stopping the Engine

Procedure for safely shutting down the engine.

Troubleshooting

Fluid and Fuel Management

Engine Oil Handling

Procedures for filling, checking, and selecting the correct engine oil.

Fuel Specifications and Handling

Requirements for gasoline type, octane, and safe fuel handling.

Maintenance and Storage Preparation

Adding Fuel Safely

Detailed steps for safely refueling the engine.

High Altitude Operation

Guidance on engine configuration for altitudes above 2,000 feet.

Pre-Maintenance Guidelines

Precautions and recommendations before starting any maintenance tasks.

Scheduled Maintenance

Maintenance Schedule

Chart outlining routine maintenance tasks based on operating hours.

Carburetor Adjustment

Information on when and how to adjust the carburetor.

Component Servicing and Inspection

Spark Plug Service

Procedures for inspecting, gapping, and replacing spark plugs.

Muffler and Spark Arrester Inspection

Instructions for inspecting the muffler and spark arrester.

Maintenance Procedures

Spark Arrester Cleaning

Steps for cleaning and inspecting the spark arrester.

Air Filter Maintenance

Instructions for cleaning and maintaining the air filter element.

Oil Draining Procedure

Procedure for safely draining used engine oil.

Storage and Preservation

Technical Information and Warranty

Engine Specifications

Technical data including displacement, bore, stroke, and oil capacity.

Tune-Up Specifications

Specifications for spark plug gap, valve clearance, and torque settings.

General Warranty Information

Details on the limited warranty, coverage, and claims process.

Emissions Control Warranty

Emissions System Coverage

Specific warranty details for the engine's emissions control system.

Owner's Warranty Responsibilities

Owner's duties regarding maintenance and obtaining service.

Related product manuals