www.timberk.com • Electric drier for changing of air humidity
5
5. DELIVERY SET
6. APPLIANCE CONTROL
Completed set of the appliance:
Appliance (air drier) - 1 piece
Appliance packing - 1 piece
User manual and Guarantee slip -1 piece
Casters(Install at four points on the bottom of unit)
• Casters can only move laterally.
• Do not force casters to move over carpet, nor move the unit with water
in the bucket. (The unit may tip over and spill water.)
When using the unit
• When first using the dehumidifier, operate the unit continuously 24
hours. Make sure the plastic cover on the continuous drain hose outlet
install stightly properly so there are no leaks.
• This unit is designed to operate with a working environment between
5
O
C/41
O
F and 35
O
C/95
O
F.
• If the unit has been switched off and needs to beswitched on again
quickly, allow approximately three minutes for the correct operation to
resume.
• Do not connect the dehumidifier to a multiple socket outlet, which is
also being used for other electrical appliances.
• Select a suitable location, making sure you have easy access to an
electrical outlet.
• Plug the unit into a electrical socket-outlet with earth connection.
• Make sure the Water bucket is correctly fitted otherwise the unit will
not operate properly.
NOTE:
Casters is optional,some models without.
NOTE:
When the water in the bucket reaches to a certain
level,please be careful to move the machine to avoid it
falling down.
NOTE:
The control panel of the unit you purchased may be
slightly different according to the models.
Fig. 4
Indicator lights
When you push the button to change operation modes, the unit will make
a beep sound to indicate that it is changing modes.
1. COMFORT Pad (optional)
Press to activate the comfort dehumidifying operation.
To Next Page
Loading...
Need help?
General