3
The large, easy to read LCD display shows the actual output, even
when the connected load exceeds the specifications. This impor-
tant feature eliminates the risk of large errors when connecting to
unknown loads. The display even shows if the battery becomes
low.
In the source mode, voltage up to 20v and current up to 20mA
may be generated in three ranges, whilst in current source mode,
the 1044 has a high 24V compliance voltage which is ideal power-
ing process control loops.
In the measurement mode, the range and function can be easily
selected and will operate as a multimeter. The measured input is
accurately shown on the LCD display.
The 1044 is housed in a pocket sized, rugged ABS case and
comes with a leatherette carry case containing a compartment for
storing test leads. Connections are by standard 4mm plugs or by
simply clamping the wires under the terminals.
A single 9V battery powers the unit or an optional external 12V DC
power supply from a mains transformer, Time Electronics order
code 7643, or a cigar lighter socket in a car may be used.
To Next Page
Loading...