Need help?Do you have a question about the Time Electronics 1044 and is the answer not in the manual?
Step-by-step instructions for setting and outputting a desired voltage level.
Step-by-step instructions for setting and outputting a desired current level.
Instructions for connecting and measuring an incoming voltage input.
Instructions for connecting and measuring an incoming current input.
Provides step-by-step instructions for performing the recalibration procedure.
Step-by-step instructions for setting and outputting a desired voltage level.
Step-by-step instructions for setting and outputting a desired current level.
Instructions for connecting and measuring an incoming voltage input.
Instructions for connecting and measuring an incoming current input.
Provides step-by-step instructions for performing the recalibration procedure.
General| Category | Measuring Instruments |
|---|---|
| Model | 1044 |
| Manufacturer | Time Electronics |
| Resolution | 1μV, 1μA |
| Interface | RS232 |
| Display | LCD |
| Output Current | 100mA |
| Protection | Overload and short circuit protection |
| Power Supply | 50/60Hz |
To Next Page