If your computer requires any other signals, you must arrange to
provide them. The PK-232 has the standard hardware handshake lines
available. As a default the PK-232 provides XON/XOFF software flow
control to the computer or terminal. The command XFLOW can be turned
OFF disabling software flow control and enabling hardware handshake if
your computer requires it. The documentation provided with your
computer or serial card should clarify any special requirements.
2.7 Terminal (Modem) Software for Other Computers
Any communications program that enables your computer to emulate or
act as an ASCII terminal with a telephone modem should work with
your PK-232. If you have a familiar program you have used
successfully, use it to communicate with your PK-232.
4/91 2-12
To Next Page
Loading...
