Timex MEDICATION MANAGER User Manual

When you need to delete a dosage time or make several changes for your dosages, you will need to make
those changes in reverse order of setting, start with box 4, then 3, then 2 and finally 1.You can also just press
the small RESET button on the back of the timer using a small tip pen or paper clip end (see battery changing
illustrations). It will clear all set information and allow you to start over.
2 additional timers
After completing and setting the alarm times for each of the
4 compartments, you will have the option of 2 additional timers.
Press MODE. Display will be what is illustrated at right.
Press and hold SET key for three (3)
seconds. --:-- will flash.
Press HOUR button to set the correct hour, then press MIN to set the correct minutes. Once desired time shows,
press the SET button. "Blood Pressure Alarm On" will scroll across the screen, stopping on Alarm On.
To set BP2, press MIN and repeat steps above to set optional BP2 alarm.
Note:When setting any of the alarms, the minimum time between must be at least 10 minutes. An ALARM
SET ERROR will scroll across the screen if the minimum is not observed. Press and hold SET and repeat the
setting process as listed above.
5

Timex MEDICATION MANAGER Specifications

General

Brand	Timex
Model	MEDICATION MANAGER
Category	Medical Equipment
Language	English