SETTING THE TIMER
You may now choose up to 4 time settings – one for each pillbox compartment. You will also have the option
to set 2 additional alarms as personal reminders. These may be used to remind you to take a blood pressure
reading, blood glucose test, etc…
Press MODE key.
ALARM OFF will appear (see illustration). This will be the reminder time for pillbox number 1
and the number will be flashing.
Press and hold SET key for three (3) seconds. --:-- 1 will flash. Press HOUR button to set the correct hour, then
press MIN to set the correct minute. Once desired time shows, press the SET button.Time will stop flashing and
ALARM ON will appear.
Press MODE key again to set the alarm time for pillbox number 2. Repeat process above to set alarms 2
through 4.
To change a dosage time, simply select the dosage that needs changed and repeat the above set process.
Note: If only 1, 2 or 3 reminders are needed, the boxes should be set in sequential order. The timer will not
allow you to set 1, 2 and 4 box.You will see ALARM SET ERROR.
4