Setting the Clock and Calendar
Setting the Clock
1. Press and hold the Time Set Button until the display begins flashing.
2. Press the Reverse or Forward Button to set the time. Holding a button for a few seconds will
advance or reverse the time rapidly. Set the correct AM/PM time, shown by the PM Indicator on the display.
3. After setting the time, press the Enter Button or wait about ten seconds for the unit to beep twice and
the display to return to the normal mode.
Setting the Calendar
1. It is important to set the correct date in order to use the 7-5-2 Alarm settings. Press and hold the Date
Set/7-5-2 Button until the display flashes and the year replaces the month/day at the bottom of the display.
2. Press the Reverse or Forward Button to set the correct year, and then press the Enter Button.
The unit will beep and the display will show the month and day. Again, press the Reverse or Forward
Button to set the current date.
3. After setting the date, press the Enter Button or wait ten seconds to return to the normal display mode.
7
Adjusting the Display Backlight
• This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To
select a backlight setting, press the Snooze/Dimmer Bar until the desired brightness is reached.
To Next Page
Loading...
Need help?
General
