Timex T433 - Buzzer Alarm Setup; Snooze Functionality; Using the Snooze Button

Waking to Buzzer Alarm
1. Set alarm time as desired. (See Setting Alarm Time.)
2. Wake switch - Set to BUZZER.
3. Mode switch - Set to ALA>RM. A bell ( ■ $ ) will appear
on the display indicating the buzzer alarm function is on.
The buzzer alarm is now set to come on automatically
at the alarm time selected.
Note: The buzzer alarm will sound for approximately 1
hour and then turn off automatically. This cycle repeats
every 24 hours unless the controls are changed. To
play the radio after the buzzer alarm sounds, set the
Mode switch to ON. Remember to reset the Mode
switch to BUZZER so the buzzer alarm comes on the
next day.
4. T o shut off the buzzer alarm, press the Alarm Reset
switch. The buzzer will come on the next day at the
same time.
11
Snooze Operation
Snooze Button
1. Snooze button - Press after the radio or buzzer alarm
sounds. The radio or buzzer alarm will go off and will
come on again in approximately 9 minutes. You may
repeat this cycle several times during the 1 hour alarm
cycle.
12