Timex T433 - Radio Operation; Tuning and Volume Control; Waking to Alarm; Radio Alarm Setup

Operating the Radio
Note: Fully extend the FM wire antenna for best FM
reception. Rotate the radio, as required, for best AM
reception.
1. Mode switch - Set to ON. The Dial Pointer lights.
2. Band switch - Set to AM or FM as desired.
3. Tuning control - Rotate to select desired station on
appropriate dial scale. Tune station for maximum
clarity.
4. Volume control - Adjust for desired volume level.
5. To turn off the radio, set the Mode switch to OFF or
ALARM.
Volume Control
Mode Switch
9
Waking to Radio Alarm
Mode Switch
Wake Switch
Alarm Reset Button
1. Set alarm time as desired. (See Setting Alarm Time.)
2. Perform steps 1 through 4 of Operating the Radio.
3. Wake switch - Set to RADIO.
4. Mode switch - Set to ALARM. A music note ( )
will appear on the display indicating the radio alarm
function is on. The radio is now set to come on
automatically at the alarm time selected.
Note: The radio will play for approximately 1 hour and
turn off automatically. This cycle repeats every 24
hours unless the controls are changed. To play the
radio after the one-hour auto period, set the Mode
switch to ON. Remember to reset the Mode switch to
ALARM so the radio will come on automatically the next
day.
5. A larm Reset button - Press to turn off the radio. The
radio will come on again the next day automatically at
the same time.
10