Timex T433 - Setting Clock and Alarm Times; Setting the Clock Time; Setting Alarm Times; Setting the Calendar

Setting Clock and Alarm Time
» (Fast Forward) Button
> (Slow Forward) Button.
< (Slow Reverse) Button ■
TIMEX/wd/gio^,.
~ fcyt'NOAlC
I J*LQ»35l °
iC-JUjza a
.Time Button
.Alarm Button
«(Fast Reverse) Button
Setting Clock Time
1. Press the Time and » buttons to rapidly advance the
time forward or the Time and « buttons to rapidly
change the time backward until'the approximate correct
time is displayed. PM is indicated to the right of the time
on the display.
2. Press the Time and > or < buttons until the correct time
is displayed.
Setting Alarm Time
1. Set the Alarm selector switch to ALM1 or ALM2 as
desired.
7
2. Press the Alarm and » buttons to rapidly advance the
time forward or the Alarm and « buttons to rapidly
change the time backward until the approximate desired
alarm time is displayed. PM is indicated to the right of
the alarm time on the display.
3. Press the Alarm and > or < buttons until the desired
alarm time is displayed.
4. Repeat steps 1 -3 to set the second alarm time.
Note:
• Alarm time cannot be set if the selector switch is in the
Alarm 1+2 position.
Selecting Alarm Time(s)
Setting the Calendar
1. Press the Calendar button, then the Month button until
the correct month digit is displayed.
2. Press the Calendar button, then the Date + or Date -
Buttons until the correct date is displayed.
To Select Alarm Time(s)
You can select Alarm 1, Alarm 2 or Alarm 1 +2 by setting the
Alarm switch to ALM 1 (Alarm 1), ALM 2 (Alarm 2) or ALM
1 +2 (Alarm 1 and 2}. The selected alarm is indicated by
ALARM 1 or ALARM 2 above the alarm time. When Alarm
1+2 is selected, the alarm time and alarm indicator alternate.
Notes:
• Each alarm has a different tone to identify which alarm
is sounding.
• At the selected wake up time an electronic alarm tone
will sound, it will increase in frequency to wake you up
gradually. This Gentle Wake System does not operate
with the radio alarm.
8