4033A Operations and Maintenance Manual 23
A.2 Environment Specifications
Warning
Ordinary protection: This unit is for INDOOR USE ONLY. It is not protected against a harmful
ingress of moisture.
Equipment intended to be installed in an Enclosed/Open type equipment rack
Pollution Degree 2 per EN61010-1
Installation (Over-Voltage) Category II for transient over-voltages per EN 61010-1
Equipment suitable for continuous operation
Table 4 lists the environmental specifications for the 4033A.
Table 4: Environment specifications
Item Temperature Relative Humidity Altitude
In Use
0°C to 50°C 0% to 90%
(non-condensing)
3,000 meters
(9,843 feet)
Storage
-40°C to 70°C 0% to 90%
(non-condensing)
Transportation
-40°C to 70°C 0% to 90%
(non-condensing)
A.4 Physical Specifications
Table 5 lists the physical specifications for the 4033A.
Table 5: Physical specifications
Item Specification
Width Standard 19-inch rack mount
Height Standard 1U
Depth 31.875 cm or 12.75 inches
Weight Approximately 4.1 kg
!
To Next Page
Loading...