9
Before you start the upgrade process::
▪ DO NOT disconnect the processor from power during this process.
▪ DO NOT exit or close the application during this process.
▪ DO NOT distance the device connected to the processor during this
process.
▪ DISCONNECT the SMC module from the processor if connected to
perform the update.
Enter the security password and click connect.
When using the TPT-SP4BT processor for the rst me, it is necessary to
install some funcons and updates. This process is quick and mandatory
to ensure the best performance of the processor.
The default password for pairing is: 123456. For added security,
change the password later in the sengs menu.
To Next Page
Loading...