To Next PageTo Next PageHow to fix a Tineco SW100400US that won't turn on?
If your Tineco Vacuum Cleaner does not turn on, the power cord might not be plugged in properly, or the socket might not be energized. Ensure that the socket is working and the power cord is securely plugged in.
What to do if the DWT full indicator is blinking on my Tineco Vacuum Cleaner?
If the DWT full indicator is blinking and you hear the voice prompt to clean the Dirty Water Tank on your Tineco Vacuum Cleaner, it means the dirty water in the DWT has reached the MAX line. To resolve this, empty the dirty water and then reinstall the DWT.
Why does my Tineco SW100400US Vacuum Cleaner have weak suction?
If your Tineco Vacuum Cleaner has weak suction, it could be due to a couple of reasons. First, check if the dry filter is installed. If it is, examine it to see if it's dirty. If so, clean it and allow it to dry completely before reinstalling. Another potential cause is that the brush roller is not installed correctly. Make sure to install the brush roller properly.
How to fix the brush roller tangled indicator blinking on my Tineco Vacuum Cleaner?
If the brush roller tangled indicator is blinking and the voice prompt says to clean the brush roller on your Tineco Vacuum Cleaner, it means the brush roller is blocked. Remove any blockages to resolve this issue.
What to do if the CWT empty indicator is blinking on my Tineco SW100400US?
If the CWT empty indicator is blinking and the voice prompt indicates that the Clean Water Tank is empty on your Tineco Vacuum Cleaner, it means the CWT is indeed empty. Refill the CWT to resolve this issue.
General| Brand | Tineco |
|---|---|
| Model | SW100400US |
| Category | Vacuum Cleaner |
| Language | English |
