TIS 600 User Manual

Introduction of Instrument
TIS 600 is a handheld safety tester which is mainly used for safety performance
tests of household appliances and industrial equipment (otherwise known as a
Portable Appliance Tester),
Its main functions are as follows:
Safety CLASS I test;
Safety CLASS II test;
Cord/Polarity test;
230V/110V Sub-Leakage test functionality
12V battery-powered, with automatic power-off function so that it will automatically
shut down if there is no operation within 5 minutes.
It has a backlight display function and will be automatically shut down within 30s.
Warning: Read this manual carefully before use and follow the relevant procedures
during the operation.
This kit includes:
※ TIS 600 safety tester 1 PCS
※ CORD mains test cord 1 PCS
※ Crocodile clip test cord (including a removable crocodile clip) 1 PCS
※ Probe 1 PCS
※ AA lithium battery 1.5V 8 PCS
※ Instructions 1 PCS
Instrument Description
1) LCD
2) F key
3) ▲ key
4) A key
5) POWER key
6) B key
7) ☀ key
8) ▼ key
9) C key
10) Output socket
11) Input socket
12) Protective grounding resistance test terminal
13) 12VDC power connector

TIS 600 Specifications

General

Brand	TIS
Model	600
Category	Test Equipment
Language	English

Summary

Instrument Introduction

Instrument Components

Lists and describes the various components and connection points of the TIS 600 safety tester.

Instrument Operation

Functions of Instrument Parts

Explains the function of each key, socket, and connector on the TIS 600 instrument.

Powering the Instrument On/Off

Details the procedure for powering the TIS 600 tester on and off, including auto-shutoff.

Instrument Calibration

Explains the calibration process for CLASS I and CORD/IEC tests to ensure accuracy.

Voltage Settings

CLASS I Safety Test Procedure

CLASS II Safety Test Procedure

CORD Safety Test Procedure

Out-phase Test Procedure

Viewing Test Results

Test Condition Parameters

Earth Resistance Test Conditions

Specifies parameters for Earth Bond and Earth Resistance tests.

Insulation Resistance Test Conditions

Details test voltage, range, and accuracy for insulation resistance tests.

Leakage Current Test Conditions

Outlines parameters for leakage current tests.

CORD Test Conditions

Specifies conditions for CORD tests, including connection types.

Out-phase Detection Conditions

Lists technical parameters for out-phase detection.