Synchronisation
Display mode
(h-m-s / date / units)
(1)
(1) Procedure allowing the digital display to be synchronised with the hands.
Note:itisnotnecessarytoperformthissynchronisationoperationwhenthe
digital display and the hands show the same time.
(1)The“h-m-s”and“date”modesremainactive.
(2)The“units”modeisatemporarysettingmode.
(3)This procedure is valid when the crystal is activated for the ALTIMETER,
CHRONO,COMPASS,ALARM,THERMOandMETEOfunctions.
Activation of the crystal
Selectingthe“Units”mode
Usingpushers
and , bring
the 2 hands precisely to 12
o’clock
Incrementation of the minute
hand(3steps=1minute)
Incrementation of the hour
hand(3steps=1minute)
Validationofthesetting
1”
5”
Activation of the crystal
Selecting the display mode
Return to h-m-s mode
(3)
1”
date
(1)
h-m-s
units
(2)
www.tissot.ch 4/14 138_en / 03.11