COMPASS
ALARM
Compass
Indication of the geographical north
Activation of the crystal
Activation of the compass
function
(1)
Activation of the adjustment of
the magnetic variation
(2)
Setting the magnetic variation to
the east (+) or west (-)
Validationofthesetting
(eg.2°East)
(1)Theminute handpoints tothe North.A moreaccurate readingis obtainedby
holding the T-Touch horizontally.
The digital display gives the set magnetic variation.
After30seconds,thedigitaldisplayreturnsto“h-m-s”mode.
(2)Formoreinformation,seetheexplanationofthemagneticvariationonpage11.
1”
2”
+ or - 1 degree
Activation of the crystal
Activation of the alarm function
(eg.12h19’)
Activation of the alarm
Setting the time
Incrementation or decrementation
by one minute
Validationofthesetting
(1)Whentheprogrammedtimeisreached,thealarmcanbestoppedbypressing
one of the pushers.
The alarm bell sounds for 30 sec. and is not repeated.
Deactivation of the alarm
1”
1”
2”
+ or - 1 minute
www.tissot.ch 8/14 138_en / 03.11