Selecting the units
METEO
Indication of the meteorological tendencies
(1)
Activation of the crystal
1”
Selectingthe“Units”mode
Activation of the setting
Selecting“Celsiusdegree/metre”
or“Fahrenheitdegree/foot”
Selecting“12”or“24”hours
(1)
Validationofselections
2”
Activation of the crystal
1”
Activation of the meteo function
(2)
(1)Formoreinformation,seetheexplanationofthemeteofunctiononpage10.
(2) The two hands indicate a tendency while the digital display gives a calculated
pressure in hectoPascal (absolute value).
After30seconds,thedigitaldisplayreturnsto“h-m-s”mode.
(1)Selectionofthe“12”hourmodeautomaticallyinvertsthecalendarreading.
Example:
(July 5) instead of (5 July).
www.tissot.ch 6/14 138_en / 03.11
To Next Page
Loading...
