1200-1600 Series Rotary Cutters 14 Titan Implement, LLC
August 2016 (423) 334-0012
WARNING
Safety Shields
Some illustrations in this manual show the
equipment with safety shields removed to
provide a better view. This equipment should never
be operated with any necessary safety shielding
removed.
CAUTION
The following safety instructions are provided to
help prevent potential injury. Not following these
instructions may lead to injury.
Personal Protection Equipment
When using this rotary cutter, wear appropriate
personal protective equipment. This list may
include, but is not limited to:
• Protective shoes with slip resistant soles
• Protective goggles, glasses, or face shield
• Protective clothing and gloves
• Safety vest (when operating near roads)
• Hearing protection
Ear Protection
Wear suitable ear protection during prolonged
exposure to excessive noise.
Hearing Loss
Prolonged Exposure To Loud Noise May
Cause Permanent Hearing Loss!
Working environments with noise-producing
equipment can cause partial to permanent hearing
loss. We recommend using hearing protection any
time noise levels exceed 80 decibels (dB). Noise
levels over 85 dB, on a long-term basis, can cause
severe hearing loss. Noise levels over 90 dB over a
period of time can cause permanent and even total
hearing loss.
Hearing loss from loud noise is cumulative over a
lifetime without hope of natural recovery.
Crush Hazard
The tractor should be equipped with a
Roll Over Protective Structure (ROPS)
and a seat belt. A crushing hazard can occur if the
driver is ejected from the seat while the tractor is in
motion. Fasten the seat belt whenever the tractor is
moving.
SAFETY
INSTRUCTIONS
The following safety instructions are provided to
help prevent injury or limit equipment damage.
N
I
NG
AR
Safety Signs
Replace any missing or hard-to-read safety
signs or instructional labels. Use care when
washing or cleaning the rotary cutter.
Replacement safety sign locations and part numbers
are provided in this manual and are available from
an authorized dealer parts department or the factory.
First Aid Kit
Have a fi rst aid kit available for use should
the need arise and know how to use it.
Fire Extinguisher
Have a fi re extinguisher available for use
should the need arise and know how to use it.
THINK
SAFETY!
Think SAFETY!
Work SAFELY!
2.5 Training
Anyone who will be using and/or maintaining the
rotary cutter must read, clearly understand, and follow
ALL safety, operation, and maintenance information
presented in this manual, other related OEM manuals,
and the safety signs
If you do not understand any information in this
manual, see your dealer or contact Titan Implement
before proceeding.
Do not use or allow anyone else to use this rotary
cutter until all information has been reviewed. Annually
review this manual before the season start-up.
Make periodic reviews of SAFETY and OPERATION
of the rotary cutter a standard practice. An untrained
operator is not qualifi ed to use this rotary cutter.
2.6 OSHA Training Requirements
The following training requirements have been taken
from Title 29, Code of Federal Regulations Part
1928.57 (a) (6). www.osha.gov.
Operator instructions. At the time of initial assignment
and at least annually thereafter, the employer shall
instruct every employee who operates an agricultural
tractor and implements in the safe operating practices
and servicing of equipment with which they are or will
be involved, and of any other practices dictated by the
work environment.
To Next Page
Loading...
Need help?
General
