Titan Implement, LLC 9 1200-1600 Series Rotary Cutters
(423) 334-0012 August 2016
This manual covers Titan Implement rotary cutter
models:
Model Model
1204 1205
1206 1305
1306 13062TW
1405 1406
1405BG 1406BG
1505 1506
1507 1606
1607
1.2 Safe Operation
Safe, effi cient, and trouble-free operation of your rotary
cutter requires that you, and anyone else who will be
using or maintaining the unit, read and understand the
information contained within the Owner’s Manual.
Use this manual for frequent reference and to pass on
to new operators or owners.
WARNING
Read And Understand Manual
To prevent personal injury or even death, be
sure you read and understand all of the
instructions in this manual and other related OEM
equipment manuals! The rotary cutter, if not used
and maintained properly, can be dangerous to users
unfamiliar with its operation. Do not allow operating,
maintaining, adjusting, or cleaning of this rotary
cutter until the user has read this manual and has
developed a thorough understanding of the safety
precautions and functions of the unit.
This rotary cutter is designed for the specifi c purpose
of cutting grass, weeds, and light brush. DO NOT
modify or use this rotary cutter for any application
other than that for which it was designed.
Rotary cutters maintained or operated improperly or
by untrained personnel can be dangerous; exposing
the user and/or bystanders to possible serious
injury or death.
1.3 Safety Shields
Some of the illustrations in this manual may show
the equipment with safety shields removed for clarity.
Never operate the rotary cutter unless all safety shields
are in place.
WARNING
Cutting or Entanglement Hazard
Operating the rotary cutter without the
safety shields can result in physical
injury or death. Make sure all shields are properly
installed before operating the rotary cutter. This
equipment should never be operated with any safety
shielding removed.
1.4 Intended Usage
Do not use this rotary cutter for any other purpose than
its intended use; cutting grass, weeds, and light brush.
1.5 Operator Orientation
The directions left, right, front, and rear, as mentioned
throughout this manual, are as seen from the tractor
operator’s seat and facing in the direction of travel.
1.6 Serial Number Location (Typical)
The model number and serial number decals are
located to the left of the gearbox.
Model Number ______________________________
Serial Number ______________________________
1.7 Product Improvements
Because Titan Implement, LLC maintains an ongoing
program of product improvement, we reserve the
right to make improvements in design or changes in
specifi cations without incurring any obligation to install
them on units previously sold.
To Next Page
Loading...
Need help?
General
