2
ASSEMBLY
WARNING: READ ENTIRE MANUAL AND COMPLY WITH ALL SAFETY AND
SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND / OR PROPERTY DAMAGE MAY
OCCUR IF INSTRUCTIONS ARE NOT FOLLOWED CAREFULLY.
WARNING: BEFORE OPERATING THE POSITIONING JACK, MAKE SURE THAT ALL
THE HARDWARE IS SECURE AND THAT THE UNIT HAS BEEN TESTED PROPERLY.
RECEIVING INSTRUCTIONS
16. Ensure that only hydraulic jack oil is used in the jack.
17. DO NOT operate the jack if damaged.
18. DO NOT allow untrained persons to operate the jack.
19. DO NOT exceed the rated capacity of the jack.
20. DO NOT allow the vehicle to move during lifting or lowering, or use the jack to move the
vehicle.
21. DO NOT jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous
substances.
22. DO NOT work under the vehicle until appropriately rated jack stands have been correctly
placed under the vehicle.
23. DO NOT ll hydraulic system with brake uid, alcohol or transmission uid. Use hydraulic
jack oil only.
24. DO NOT adjust the safety overload valve
25. DO NOT use for aircraft purposes
26. When not in use store jack, fully lowered, in a safe, dry, childproof location.
27. The warnings, precautions, and instructions discussed in this manual cannot cover all
possible conditions and situations that may occur. The operator must understand that
common sense and caution are factors, which cannot be built into this product, but must
be supplied by the operator.
Visually inspect all components for shipping damage. If any shipping damage is found, notify
carrier at once. Shipping damage is NOT covered by warranty.
No. Description Qty
1 Handle Tube 1 1
2 Handle Tube 2 1
3 Jack Body 1
4 Instruction Manual 1
1
2
4
3
To Next Page
Loading...