Need help?Do you have a question about the Titan HKE-L and is the answer not in the manual?
Explains symbols like Caution, Attention, Note used in the manual.
Specifies the tool is for strapping packages with steel strap.
Warns against using the tool for hoisting or with plastic straps.
Details the warranty period and conditions for TITAN tools.
Lists specific causes that void the warranty and liability.
States the tool is free of harmful substances and advises following disposal guidelines.
Advices reading the manual before using the device.
Warns against inserting fingers into the pulley area.
Recommends wearing eye, face, and hand protection.
Ensures no body parts are between strap and goods; warns strap can break.
Warns strap can break and fly outward; advises safe positioning.
States using non-original parts/straps voids warranty and may cause issues.
Emphasizes orderly workplace, stable position, and trained personnel.
Stresses regular inspection, proper maintenance, and prohibits modifications.
Specifies "No seal joint" and tension force up to 6.000 N.
Lists the tool's weight (3.2 kg) and dimensions (L, B, H).
Details strap widths, thicknesses, and tensile strengths for standard/high quality.
Illustrates the tool's components with numerical labels.
Outlines basic operational steps: clamping, tensioning, sealing, cutting.
Guides on wrapping, positioning, and inserting the strap into the tool.
Details holding the strap, gripping levers, and inserting into the tool.
Describes adjusting strap tension and forming the "No-seal" joint.
Instructs on cutting the strap and withdrawing the tool after operation.
Lists criteria for checking the quality of the formed seal.
Explains how to adjust the cutter depth using set screw 49 and nut 72.
Details adjusting the gap between feed wheel 29 and gripper plate 503 to 0.2 mm.
Describes replacing strap guides and adjusting guides for different strap widths.
Lists areas to clean weekly and methods (compressed air, oil).
Recommends daily visual inspection and immediate replacement of damaged parts.
Declares the HKE-L complies with EU machinery directive 2006/42/EC.
Identifies manufacturer and authorized representative for technical documentation.
Provides distribution details for Allstrap.
To Next Page
General