On-Board Tool Cleaning
These vacuums are equipped with on-board cleaning tools
including a metal telescopic power wand, stretch hose,
dusting brush and a crevice tool.
1. To use the cleaning tools, lift the hose handle straight up
from the vacuum (Fig. 1).
2. Extend the wand by pulling the button back and pushing
the end of the wand forward (Fig. 2).
3. Attach any of the on-board tools to the end of the wand
or if you do not need the wand, remove the wand and
any tool can be connected directly onto the hose handle.
Fig. 1
Fig. 2
10
To Next Page
Loading...
Need help?
General
